Spills in house or workplace can be dangerous and it can lead to crying just like the proverb- “don’t cry over spilled milk”. It can be dangerous as well as anyone can slip on the floor and get injured. In some cases, these injuries can be dangerous and lead to fracture. Therefore, it is important to properly mop the floor and clean the spills. However, simply using the mopping materials are not enough to get the clean floor. Right mopping materials and skills give the perfect clean and shiny floor. High quality products are ideal for mopping spills. They clean the surface properly without leaving any strain.
Different substances can spill on floor which leave stubborn strain and can cause major slip.
Generally, oil spills are very dangerous and it should be taken carefully. An injury from oil spill can lead to fracture. In workplaces these are very common where any worker can fall badly on spills and claim for compensation. Improper cleaning can lead to bad reputation of the company.
Tips for appropriate materials
With the right equipments and proper tips you can make you workplace a better and clean place for work. Here are the tips:
Use appropriate materials-
Different spills can occur in workplace which needs extra efforts for cleaning. Only using right materials can protect the people around you. The workplace should be cleaned and wiped properly before beginning the activities. Here are the few materials that are ideal for mopping skills:
- Absorbent materials such as cloths, towels, rags, etc
- Paper towels
- Detergent solutions
- Wet floor signs
- Mops
- Spill kits
- Hand held squeegee vacuum
- Squeegee
These materials are ideal for mopping spills of any types. However, one should also keep an eye on possible leaks at workplace. Below are the leaks that can occur at workplace.
Leaks at workplace
Sometimes leaks can occur from pipe and not from a spill. It can also occur from ceiling or pumping. One should keep an eye on all possible area from where leaks can occur. Continuous checking of spills can prevent one from falling and slipping.
Oil versus water
It is important to check whether the spill is water or oil. It is so because oil spills can cause more danger from that of water. Oil is flammable sometimes thus causing fire which is not the case with the water spills. Sometimes oil can produce gas as well which further increases the threat of fire at workplace. It can leads to severe injuries.
Consider the size
Size of spill should be taken into consideration. It is because a large and small spill is taken care of differently. For spills of water say 3 gallons, paper towel is not needed. Moreover, the right type of equipment should be used to clean the spills so determining the size can ease in deciding the cleaning material.
These tips and precautions can save a lot from spill threats at workplace. However, even after taking lots of precautions, spills can occur. So, what is the solution? Choosing right materials that are ideal for mopping spills is the solution.
Mop is the one common tool used for mopping. Therefore one should know what kinds of mops are best. A mop has head and handle which are important factors of choosing a mop. The mop head comes in many sizes and made of different materials. So, how to pick the mop with good head and handle.
Here are the tips
- Number of materials is used to make the head of mop. Every material has its own drawbacks and benefits. The different materials used are as follows:
- Cotton – heads made of cotton are cost effective and absorbent. They dry slowly thus they are prone to deterioration. For light duty cleaning and spill pick up mop with cotton heads are good.
- Blend- mop heads made of synthetic fibers and cotton are good. It gives a balance between performance and affordability. It is good for every kind of cleaning and disinfecting and also for regular use.
- Rayon- mop with rayon heads are good absorbent. They dry quickly and are not prone to mildew. This is best for disinfectants and floor finishes.
- Synthetic- if you need strength then synthetic mops is good as they provide greatest strength to the mop. It is also highly resistant to mildew. It can be bleached as well without being damage. These mops are best to be used in healthcare facilities. It is also good for regular cleaning and disinfectants.
- Microfiber- they are best because they have good cleaning power and are highly absorbent. However, they are expensive and thus are not used for regular cleaning. But they are durable which means one time investment will be beneficial. They can be laundered and are first choice for general purpose use.
Choice based on applications
- For general purpose cleaning, mops with cotton heads are best. Synthetic microfiber mops are also good.
- Finish mopping needs mops with good absorbency therefore mops with looped ends are good as they provide thorough coverage.
- For disinfection procedures synthetic, rayon and blend mops are good.
- For cleaning floors that are rough mops with special textures are good.
Mop handle options
Mop handle are also important same as mop heads. They are made of wooden, fiberglass and aluminum. Wooden handles are economical as they are light. However they can be shatter or break in case of mishandling. Aluminum is good as well because they are economical and lightweight. However, fiberglass is ideal for mopping spills as they are durable, light weight and cost effective.
If you go through these tips then you will select the right mops that are good and ideal for mopping. One can buy the cleaning materials online. Various cleaning materials are available online which are perfect for cleaning any kind of spills. However, carefully check out where the leakage is so that you can prevent any spills. It will make the workplace a clean and safe place. So, don’t think that simply cleaning is enough. Carefully choose the mopping materials and prevent accidents in workplace.